Free Shipping On Orders Above $1000

500mA 12 Watts Class 2 Power Supply 5.12027

New 500mA 12 Watts Class 2 Power Supply 5.12027

500mA 12 Watts Class 2 Power Supply

• Constant Current Design
• Universal Ac Input / Full Range
• Fully Encapsulated With Ip67 Level
• Withstand 300vac Surge Input For 5 Seconds
• Protections: Short Circuit / Over Current / Over Voltage
• Fully Isolated Plastic Case
• Cooling By Free Air Convection
• Ul1310 Class 2 Power Unit
• Pass Lps
• 100% Full Load Burn-In Test
• Low Cost, High Reliability
• Suitable For Led Lighting And Moving Sign Applications

 

MODEL Item Number 5.12027
OUTPUT RATED CURRENT 500 mA
DC VOLTAGE RANGE 8~ 24V
RATED POWER 12W
RIPPLE & NOISE (max.) Note.2 200m Vp-p
VOLTAGE TOLERANCE Note.3 ±5.0%
LINE REGULATION ±1.0%
LOAD REGULATION ±2.0%
SETUP, RISE TIME Note.6 500ms, 120ms I 230VAC 500ms, 120ms I 115VAC at full load
HOLD UP TIME (Typ.) 50ms/230VAC 16ms/115VAC at full load
INPUT VOLTAGE RANGE 90~264VAC       127~ 370VDC
FREQUENCY RANGE 47 - 63Hz
EFFICIENCY (Typ.) 85%
AC CURRENT (Typ.) 1.1A/115VAC    0.7A/230VAC
INRUSH CURRENT (Typ.) COLD START 30A/115VAC      60A/230VAC
LEAKAGE CURRENT 0.25mA / 240VAC
PROTECTION CURRENT LIMIT ±5% Rated output current
  Protection type: Constant current limiting type
OVER VOLTAGE 50.4 ~  60V, 31.5  ~ 40.5V, 27.6   ~  32.4V
  Protection type: Shut off o/p voltage, clamping by zener diode
ENVIRONMENT WORKING TEMP. .-30~+75°C (Refer to output load derating curve)
WORKING HUMIDITY 20 - 90% RH non-condensing
STORAGE TEMP., HUMIDITY .-40 - +80°C, 10 - 95% RH
TEMP. COEFFICIENT ±0.03%/°C (0 - 50°C)
VIBRATION 10 - 500Hz, 2G 1Omin./1 cycle, period for 60min. each along X, Y, Zaxes
SAFETY & EMC (Note 6) SAFETY STANDARDS UL130 Class 2, CAN/CSA C22.2 No. 223-M91 (except for LPC-35-700).IP67 approed; design refer to TUV EN60950-1, EN61347-2-13
WITHSTAND VOLTAGE I/P-O/P:3KVAC 
ISOLATION RESISTANCE I/P-O/P:>100M Ohms/500VDC/ 25°C / 70% RH
EMI CONDUCTION &RADIATION Compliance to EN55022 (CISPR22) CLASS B
HARMONIC CURRENT Compliance to EN61 000-3-2 Class A, EN61000-3-3
EMS IMMUNITY Compliance to EN61 000-4-2,3,4, 5, 6, 8,11, ENV50204, EN55024, light industrial level, criteria A
OTHERS MTBF 743.5 Khrs min. MIL-HDBK-217F (25°C)
DIMENSION 148*40*30mm (L*W*H)
PACKING 0.34Kg; 40pcs/14.6Kg/O.63CUFT
NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance: includes set up tolerance, line regulation and load regulation.
4. Derating may be needed under low input voltage. Please check the static characteristics for more details.
5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufactures must re-quality EMC Directive on the complete installation again.
The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply  may lead to increase of the set up time.
7. In the European market this power supply can be used for LED lighting applications with input power up to 25W.
8. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minutes.


 

Write a review

Please login or register to review
  • Views: 1585
  • Product Code: 5.12027
  • Availability: In Stock
8 Product(s) Sold
  • $33.88
  • 10 or more $30.49
  • 26 or more $28.80
  • 50 or more $27.10